Panasonic tx-37lz70p Manuel D’Utilisation

30

Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.

Some recording equipments are not applicable. Read the manuals of the equipment.

Recording information or if recording is not possible, a message is displayed. 
(Only when the programme number is “0” or “AV mode” for some equipment.)

When VCR or DVD recorder starts playback or direct navigator / function menu 
for the equipment are activated, the TV is turned on and input mode is switched 
automatically so that you can view the content. (Only when TV is in Standby mode.)

When TV is set to Standby mode, the recording equipment is also automatically 
set to Standby. (Only when the videocassette or DVD is not active.)

•

Use the VCR / DVD recorder with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”

•

Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 34)

•

Q-Link terminal setup in Setup Menu (Q-Link, AV1 / AV2 out). (p. 21)

DIRECT TV REC 

Direct TV Recording:
Recording the current programme in VCR / DVD recorder 
immediately.

•

When Direct TV Recording is performed, the 

recording equipment is automatically turned on if it 

is in Standby mode.

•

The recording equipment is recording from its own 

tuner. You can turn the TV off during recording.

•

If you turn the TV off during recording from an AV 

source, the recording will be stopped.

• “DATA LOGIC” (a trademark of Metz Corporation) 

• “Megalogic” (a trademark of Grundig Corporation)

• “Easy Link” (a trademark of Philips Corporation) 

• “SMARTLINK” (a trademark of Sony Corporation)

Read the manuals of the equipment too.

•

Perform Auto Setup. (p. 22)

  When fi rst using this TV, see “Auto Setup”. (p. 10)

•

Perform download to the equipment. (p. 21)