kymco mo p250 Instruction De Maintenance

Disconnect the water hoses from the water

pump cover. (!chapter 5)

Disconnect the water hoses from the right

crankcase cover.

Remove the nine bolts attaching the right

crankcase cover and the cover.
Remove right crankcase cover.

Remove met-in box and frame body cover.

(!2-6)
Disconnect the water hoses from the water

pump cover. (!chapter 5)

Disconnect the water hoses from the right

crankcase cover. (!chapter 5)
Disconnect A.C. generator wire coupler and

oil pressure switch wire. (!chapter 5)

Remove the eight bolts attaching the right

crankcase cover and the cover.
Remove the left and right rear shock absorber

lower mount bolts. (!chapter 5)

Elevate the back of engine as possible by

placing a suitable stand under the back of

engine.
Remove the bolt between water pump cover

and oil filter screen cap.
Remove right crankcase cover.

Remove the two pulser coil attaching screws

and the pulser coil.

Remove the three A.C. generator stator bolts

and the stator.

Water  Hose

Bolts

Water  Pump  Cover

Screws

Bolts

Pulser Coil

A.C.  Generator Stator

Bolts

When removing the pulser coil and

stator, be careful not to damage them to

avoid shorted or broken wire.

＊

Bolt

Water  Pump  Cover

Oil Filter Screen Cap

Support the machine securely so there is

no danger of it falling over.

＊