Toshiba brst-10 Manuel D’Utilisation

5-6

EO1-13013

5.4 INSERTING THE SLIP

1. Setting the slip

• Insert the slip until it fits against the paper feed roller and the slip side guide.
• Setting the slip after the SLIP LED blinks is recommended.

2. Slip paper

• Use the flat paper which is not curled, folded, warped, or wrinkled.  Failure to do

this may cause ink smudge resulting from contact with the ink cartridge or a paper
feed error after printing.  If the paper end is much curled or folded, the slip paper
may not be set. (In this case, the printer feeds the paper.)

3. Removing the jammed slip

• Check the SLIP LED blinks, and then remove the jammed paper with the [FEED]

switch.

• If the paper cannot be removed with the [FEED] switch, open the printer cover and

pull out the jammed paper manually.

Fig. 5-11

Slip side guide

Paper feed roller

Slip

POWER

FEED

RESET

CART-

RIDGE

SLIP

INKOUT

POWER

ERROR

POWER

FEED

RESET

CART-

RIDGE

SLIP

INKOUT

POWER

ERROR

1. When the host sends the slip print command to the printer,

the SLIP LED blinks.

Fig. 5-10

Slip

Slip Inlet

2. Insert the slip straight into the slip inlet while aligning the

right side of the slip with the slip inlet.