Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. dynabook v1 v2 satellite p300
  5. Instruction De Maintenance

Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

Télécharger
Page de 208
  Replacement Procedures 
 
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08) 
 
 
4-45
Installing the cover assembly 
The following describes the procedure for installing the cover assembly (See Figure 4-19 to 
4-21). 
1.  Install the cover assembly to the base assembly. 
NOTE:  Be careful not to catch the cables between cover assembly and base assembly.  
2.  Connect the touch pad flat cable to the connector on the system board. 
3.  Secure the cover assembly with the following screws from the back and bottom of 
computer. 
•  M2.0×5.0        FLAT BIND screw  Back             x4 
•  M2.5×6.5        FLAT BIND screw   Back             x11 
•  M2.5×8.0 
FLAT BIND screw  Back  
 
x4 
•  M2.0×3.0         FLAT BIND screw Back             x5 
4.  Free the cable from cable-drain when through the antenna cable to PCB hole.