Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. dynabook v1 v2 satellite p300
  5. Instruction De Maintenance

Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

Télécharger
Page de 208
  Replacement Procedures 
 
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08) 
 
 
4-47
 
Installing the touch pad 
The following describes the procedure for installing the touch pad (See Figure 4-22). 
1.  Peel off the separator covering on the sensor portion of a new touch pad. 
NOTE:  Do not reuse the touch pad so that it can not be used after peeling off from the 
computer. Be sure to stick a new touch pad. 
   
 
When sticking the touch pad, be careful not to get the bubbles under the touch 
pad.  
 
2.  Stick and install the touch pad on the cover assembly. 
3.  Install the touch pad plate and secure it with the following screws. 
•  M2.0×3.0  SUPER THIN HEAD screw 
 
x7 
4.  Stick the insulator on the touch pad plate. 
5.  Connect the touch pad flat cable to the connector on the touch pad and stick the 
glass tape on the connector.