Toshiba hd-a1 Manuel D’Utilisation

Page de 69
52
6
Chapter
6
 
Others
Picture
TV Shape
16:9
Select when a 16:9 wide TV is connected.
4:3
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fi ll your TV screen. Either or 
both of the picture’s sides are cut off.
4:3Letter Box
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and 
below the picture.
Notes
  When an HD DVD disc or a DVD video disc has a particular 
available picture shape, the contents may not be compatible 
with other picture shapes.
  DVD video discs containing 4:3 picture only always display 
4:3 pictures regardless of this setting.
  If “16:9” is selected while connecting a 4:3 TV, playback 
pictures may be distorted horizontally or shrink vertically. 
Make this setting according to your TV shape.
  Actual picture shape may depend on signal types of 
broadcasts or input sources, or settings on the connected 
TV. Refer to the owner’s manual of your TV.
Enhanced Black Level
You can adjust the black level of the output signal.
On
  To display deeper, richer black than in “Off” setting. (0 IRE)
Off
  Normal black level. (7.5 IRE)
Picture Mode
There are two types of source content in pictures recorded in 
DVD video discs: fi lm content (pictures recorded from fi lms 
at 24 frames per second) and video content (video signals 
recorded at 30 frames per second). Make this selection 
according to the type of content being viewed.
Film
The player converts fi lm content pictures in the progressive 
output format appropriately. Suitable for playback of fi lm 
content pictures. 
Video
The player fi lters video signal, and converts it in the 
progressive output format appropriately. Suitable for 
playback of video content pictures.
Auto
Select this position normally. The player automatically 
detects source content, fi lm or video, of playback source, 
and converts that signal in the progressive output format in 
an appropriate method.
Note
 Depending on a disc, “Auto” setting may not be able to detect
  source content. If pictures may be doubled, roughened, or 
may show other abnormality, “Film” or “Video” selection is            
recommended for possible improvement.
Customizing the function settings (Continued)