Toshiba hd-a1 Manuel D’Utilisation

6

Chapter

6

 

To select various parameters for the analog 5.1 channel output.

When a 5.1 channel surround system is connected to this 

player.

Go to the next step (see below) for detailed selections.

When a 2 channel stereo system is connected to this player.

Set the speaker sizes, distance to each speaker and the 

crossover frequency.

1  Select a speaker by pressing   /  /   /   buttons, and 

press OK button.

2  Select the size by pressing   /   buttons, and press OK 

button.

Small: 

Select if the speaker cannot output low 

frequency.

Large: 

Select if the speaker can output low 

frequency.

Small: 

Select if the speaker cannot output low      

frequency.

Large: 

Select if the speaker can output low           

frequency.

None: 

When the speaker is not connected.

Use: 

When a subwoofer is connected.

Don’t Use:  When a subwoofer is not connected.

Low frequency under which you set here will be of a 

subwoofer. Select one from 80 Hz/100 Hz/120 Hz.

Select a distance to each speaker from the listening 

position.

3  Select “Next” by pressing   /  /  

/   buttons, and press 

OK button.

  The next screen appears.

4  Select “Automatic Test Tone” by pressing   /  /  

/   

buttons, and press OK button.

  A test signal is sent to each speaker. Adjust each of the 

volumes by pressing   /  , selecting speakers by   /  , 

so that each speaker can sound at the same volume.

  For further adjustment, check the channel balance on the 

amplifi er.

5  When complete, select “OK” and press OK button.

To select a preferred language for disc menus.

To display disc menus in English.

To display disc menus in French.

To display disc menus in Japanese.

To make a further language choice.

After pressing OK button, follow steps 1) – 4) below.

1)  Obtain the language code of the preferred language 

from the Language code list (

 page 58).

2)  Select the fi rst character by pressing   /   buttons.

3) Press   /   buttons to shift. Select the second character 

by pressing   /   buttons.

4)  Select “OK” and press OK button.

  Some discs may be played in a different language from that 

you selected. A prior language may be programmed by the 

disc.

To select a preferred language for subtitles.

To disable subtitles.

To display subtitles in English.

To display subtitles in French.

To display subtitles in Japanese.

To make a further language choice.

After pressing OK button, follow steps 1) – 4) below.

1)  Obtain the language code of the preferred language 

from the Language code list (

 page 58).

2)  Select the fi rst character by pressing   /   buttons.

3) Press   /   buttons to shift. Select the second character 

by pressing   /   buttons.

4)  Select “OK” and press OK button.