Toshiba qosmio f60 Manuel D’Utilisation
User’s Manual
G-3
TOSHIBA PC Health Monitor
Cleaning the cooling module
This section explains how to clean the Cooling module.
To clean the cooling module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
To clean the cooling module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
the
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Remove the battery pack (refer to the
section in Chapter 6, Power and Power-Up Modes, if required).
4. Open the display panel.
5. Slip your finger under a notch at the end of the keyboard brace and lift
5. Slip your finger under a notch at the end of the keyboard brace and lift
up to release latches and remove the keyboard brace.
Figure G-1 Removing the keyboard brace
6. Remove three screws and the metal fittings securing the keyboard.
Figure G-2 Removing the screws and metal fittings
1. Keyboard barce
1. Screws
2. Metal fittings
1
1
2