Toshiba portйgй m700 series, m705 series Manuel D’Utilisation

51

A memory module can be installed in the memory module slot on 
the base of the computer. You will need a small Phillips screwdriver 
for this procedure.

If the computer has been running recently, the memory module may 
be hot. The surrounding area may also be hot. Allow the module to 
cool to room temperature before replacing it. Avoid touching the 
cover, the module, and the surrounding area before they have cooled. 
Failure to follow these directions could result in minor bodily injury.

To avoid damaging the computer’s screws, use a small Phillips 
screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

Before you install or remove a memory module, turn off the computer 
using the Start menu. If you install or remove a memory module 
while the computer is in Standby or Hibernation mode, data will be 
lost.

If the computer is on, begin at step 

; otherwise, skip to step 

Click Start, and then Turn off computer or Shut Down 
(depending on the system).

The Turn off computer or Shut Down window appears.

Click Turn Off or Shut Down.

The operating system turns off the computer.

Unplug and remove any cables connected to the computer, 
including the AC adaptor.

Remove the battery. For information on removing the battery, 
see