Toshiba satallite pro 6000 series c6602-1001m1 Manuel D’Utilisation

Page de 281
58
Connecting Other External Devices
Using external display devices
TV (or other external video device) only
3
Release the 
Fn
 key.
TECHNICAL NOTE: You can also change these settings 
using the Display Properties Box.
For more information on switching the display output, see 
.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other 
video display device), you may need to adjust the video settings. 
See the video device documentation for additional configuration 
steps.
TECHNICAL NOTE: In order to use one of the simultaneous 
modes, you must set the resolution of the internal display 
panel to match the resolution of the external display device. 
The external display device must support a resolution of 
640 X 480 or higher.
Video limitations
Keep in mind that the quality of the display will be limited to the 
capabilities of the external video device.
If the external video device, such as an SVGA monitor, is 
capable of displaying at a maximum resolution of 640 x 480 
and your system is set for a higher resolution, only part of the 
desktop will appear on the screen. You can view the “lost” 
area by scrolling to it.
Since most televisions and video projectors overscan by 15 to 
20 percent, some of the desktop will be outside the viewing 
area. You can view the edge of the desktop by scrolling to it.