Toshiba satallite pro 6000 series c6602-1001m1 Manuel D’Utilisation
60
Connecting Other External Devices
Using a mouse
Using a mouse
key combination through the Windows Control Panel Toshiba
HWSetup icon. For more information about Hardware Setup, see
HWSetup icon. For more information about Hardware Setup, see
NOTE: The Control Panel window must be set to Classic
View to access the Toshiba HWSetup icon.
View to access the Toshiba HWSetup icon.
Using a mouse
You may want to use a mouse instead of the computer’s built-in
pointing device, the AccuPoint II. You can use a serial mouse or a
PS/2-compatible mouse.
pointing device, the AccuPoint II. You can use a serial mouse or a
PS/2-compatible mouse.
A serial mouse disables the AccuPoint II. A PS/2-compatible
mouse allows you to have the AccuPoint II active at the same time.
mouse allows you to have the AccuPoint II active at the same time.
Setting up a PS/2 mouse with the AccuPoint II
When you connect a PS/2-compatible mouse to the PS/2 port, you
may use the mouse, the AccuPoint II, or both.
may use the mouse, the AccuPoint II, or both.
CAUTION: When connecting any PS/2 device, turn off your
computer to prevent any possible hardware damage.
computer to prevent any possible hardware damage.
NOTE: If you connect a PS/2 mouse to the computer while it
is in Standby mode, you will not be able to use the mouse
when you turn the computer on.
is in Standby mode, you will not be able to use the mouse
when you turn the computer on.
To set the PS/2 mouse to work simultaneously with the
AccuPoint II:
AccuPoint II:
1
Click Start, Settings, then point to Control Panel.