Toshiba satellite m110 Manuel D’Utilisation

53

5.375 x 8.375 ver 2.3

Additional memory modules can be installed in the memory 
module slots on the base of the computer. You will need a 
small Phillips screwdriver for this procedure.

If you use the computer for a long time, the memory module 
will become hot. If this happens, let the module cool to room 
temperature before you replace it.

To avoid damaging the computer’s screws, use a small Phillips 
screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You 
can install one or two memory modules.

Before you install or remove a memory module, turn off the 
computer using the Start menu. If you install or remove a 
memory module while the computer is in Standby or 
Hibernation mode, data will be lost.

If the computer is on, begin at step 

; otherwise, skip to step 

.

Click Start, and then Turn off computer or Shut Down 
(depending on the system).

The Turn off computer or Shut Down window appears.

Click Turn Off or Shut Down.

The operating system turns off the computer.

Unplug and remove any cables connected to the 
computer, including the AC adaptor.