Toshiba strata ip5000 Manuel D’Utilisation

You can make an announcement page to a group of telephone speakers selected in 
system programming with 

All Call Page

 on the DSS console. 

SD

 (if programmed) 

on either the DSS console or the ADM can be used for page announcements. See 

.

Either the DSS buttons on your DSS console or the associated telephone can be set in 
system programming to ring stations that are in the Call Forward mode, instead of 
being forwarded. Usually the console’s telephone is the unit activated to perform this 
function. Among other applications, this feature can be used to notify a person who 
forgets to deactivate the Call Forward feature after returning to the office.

1. Press 

Cnf/Trn

 or extension button.

2. Dial the station number set for call forward.

Make the call as you would from any other station. This procedure assumes your 
station has a typical program setting.

Press the station DSS button set for Call Forward.

This button enables a pre-programmed station to place the system into Day, Day2 or 
Night Mode. See your System Administrator for information on the settings for Day, 
Day2 or Night Mode. These modes will transfer calls to a designated location or voice 
mailbox, depending on programming.

1. Press 

Night Transfer

.

2. Press the desired Mode number:

•

Press 

1

 for Day Mode (LED remains off).

•

Press 

2

 for Day2 Mode (LED flashes red).

•

Press 

3

 for Night Mode (LED is solid red).