Toshiba strata ip5000 Manuel D’Utilisation

The 60 button Direction Station 
Selection (DSS) Console operates 
alongside a digital telephone to provide 
60 (up to 180) additional buttons (shown 
right). 

The 60 programmable feature buttons 
can be assigned as exchange line, 
extension, DSS, One Touch Speed Dial 
or any other flexible feature. 

The IDM5060 (IP DSS module) console 
uses dual red and green LEDs to show 
call and feature status.

DSS buttons can appear on both the ADM and DSS Console. Each DSS button is 
associated with a particular station in your telephone system. DSS buttons can transfer 
an outside call to the associated station or make a direct call to the associated station. 

The DSS LED lights steady red when the station associated with the DSS button is 
ringing, busy on a call, or is idle, but all appearances of the station’s extensions are 
busy or in-use by other stations. When the associated DSS button is in the Do Not 
Disturb mode, the LED blinks red at a slow rate.

DSS buttons cannot directly call station Phantom extension numbers, Distributed 
Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as 
One Touch Buttons that may be programmed to call these destinations.

To call a station’s extension from either a DSS console or a ADM, press the DSS 
associated with the station. 

A station call with a DSS button can be made on-hook or off-hook, and with Voice 
First or Tone signalling. After pressing the button, treat the call like any other 
station call made from an IP telephone.