Toshiba strata ip5000 Manuel D’Utilisation

You can transfer internal or outside calls to an idle station from either a DSS console 
or a ADM.

1. Press the DSS button corresponding to the station to be called.

The call is placed automatically on hold. The Line or extension LED flashes green 
at double the on-hold rate, and the DSS LED flashes green. You hear a single ring 
tone. (If using the Tone signalling mode, you hear successive ring tones.)

2. Announce the call. 

With Tone signalling, you would have to wait for the called station to answer 
before announcing the call.

3. Hang up.

The call rings the called station when you hang up. While the called station is 
ringing, the DSS LED is steady red, and the Line LED flashes green at the on-hold 
rate or if on a extension button, it goes idle. 

When the called station answers the call, the DSS LED stays steady red, and the 
Line LED becomes steady red.

4. If the station does not answer before a period set in system programming, the call 

recalls your station.