Toshiba 3 lcd data tlp680u Manuel D’Utilisation

• Pressing KEYSTONE on the remote control

can also correct the keystone distortion
automatically. 

• These adjustments are stored until you turn

the power off.

• Pressing RESET will return the adjustment or

setting currently selected to default.

• Pictures may be slightly deteriorated by the

keystone correction.

Depending on the operating condition such as
vibration, the distortion may be beyond the
automatic keystone correction. The horizontal
condition setting (0 degrees setting) may be
disordered. In such a case, perform the
following 0 degrees setting to correct the
distortion.

1) Place the projector on a level surface.

2) On the menu, select “Auto set” in

“Keystone”.

3) Press RESET.

• Do not make the 0 degrees setting on an

inclined or unstable surface or in a shaky
place as it may not be performed properly.

• To store this setting even if the power is

turned off, follow the procedure of “Saving
data”. 

Preparation
• Display the image as explained in “Picture

Projection”. 

• Set the POINTER/PJ selector to “PJ”.

The keystone distortion is corrected
automatically.  For further correction,
follow the below steps.

 (–): To reduce the upper width.
 (+): To reduce the lower width.

The menu disappears.

RESET

KEYSTONE

A u t o s e t

Ke y s t o n e

A d j u s t

–

+