kymco mo movie125150 Instruction De Maintenance
17
. LIGHTS/INSTRUMENTS/SWITCHES
17-2
HEADLIGHT
BULB REPLACEMENT
Remove the front cover. (!2-4)
Remove the front cover. (!2-4)
Remove the rubber boot from the bulb socket.
Remove the bulb socket by turning it counter-
clockwise.
Remove the bulb for replacement.
Install a new bulb, aligning the groove on the
bulb socket with the tab on the bulb.
Install the bulb socket.
Install the rubber boot.
Install the front cover. (!2-4)
HEADLIGHT REMOVAL
Remove the front cover. (!2-4)
Remove the front cover. (!2-4)
Remove the six screws attaching the
headlight.
Remove the headlight.
The installation sequence is the reverse of
removal.
After installation, adjust the headlight beam.
(!3-9)
FRONT TURN SIGNAL LIGHT
Remove the front cover. (!2-4)
Remove the front turn signal bulb socket and
replace the bulb.
The installation sequence is the reverse of
removal.
POSITION LIGHT/REAR TURN
SIGNAL LIGHT
BULB REPLACEMENT
Remove the rear cover. (!2-2)
Remove the rear cover. (!2-2)
Remove the two screws to remove the
position light/rear turn signal light shell.
Remove the bulb sockets and replace the
bulb.
The installation sequence is the reverse of
removal.
AC 110V
Screws
Bulb Socket
Rubber Boot
Screws
Turn Signal Bulb Sockets
Position Light Shell