kymco mo movie125150 Instruction De Maintenance

. STARTING SYSTEM

16-2

STARTER MOTOR

REMOVAL

Remove the two starter motor mounting bolts

and the motor.

Remove the waterproof rubber jacket and

disconnect the starter motor cable connector.

DISASSEMBLY
Remove the two starter motor case screws,

front cover, motor case and other parts.

INSPECTION
Inspect the removed parts for wear, damage

or discoloration and replace if necessary.

Clean the commutator if there is metal

powder between the segments.

Check for continuity between pairs of the

commutator segments and there should be

continuity.

Also, make a continuity check between

individual commutator segments and the

armature shaft. There should be no

continuity.

AC 110V

Front Cover

Starter Motor Cable

Bolts

Commutator

Before removing the starter motor, turn

the ignition switch OFF and remove the

battery ground. Then, turn on the

ignition switch and push the starter

button to see if the starter motor

operates properly.

＊

Motor Case

Case Screws

Cable Clamp