kymco mo x500 Instruction De Maintenance
20
. LIGHTS/METERS/SWITCHES
20-17
XCITING 500
BANK ANGLE SENSOR
INSPECTION
Support the scooter level surface.
Remove the meter panel (page 2-13).
Support the scooter level surface.
Remove the meter panel (page 2-13).
Turn the ignition switch to “ON” and measure
the voltage between the following terminals of
the bank angle sensor connector with the
connector connected.
the voltage between the following terminals of
the bank angle sensor connector with the
connector connected.
TERMINAL
STANDARD
Black/Blue
Battery voltage
Black/White
Battery voltage – (0-1 V)
The engine should stop as you incline the bank
angle sensor approximately degrees to the left or
right.
angle sensor approximately degrees to the left or
right.
REMOVAL/INSTALLATION
Disconnect the bank angle sensor connector.
Remove the two screws, washers and bank angle
sensor.
Disconnect the bank angle sensor connector.
Remove the two screws, washers and bank angle
sensor.
Bank Angle Sensor
Bank Angle Sensor Screws/Washers