kymco mo super 950 Instruction De Maintenance
16
. INSTRUMENT/SWITCHES/LIGHTS
16-2
SUPER 9 50
FUEL UNIT
REMOVAL
Remove the frame body cover. (!2-3)
Remove the frame body cover. (!2-3)
Disconnect the fuel unit wire connectors.
Turn the fuel unit retainer counterclockwise
to remove it.
Remove the fuel unit.
INSPECTION
Remove the fuel unit.
Remove the fuel unit.
Measure the resistance between the fuel unit
wire terminals with the float at upper and
lower positions.
Wire Terminals
Upper
Lower
G_
Y/W
33W
686W
G_
L/W
566W
53W
Y/W_
L/W
600W
600W
FUEL GAUGE INSPECTION
Connect the fuel unit wire connectors and
Connect the fuel unit wire connectors and
turn the ignition switch “ON”.
Check the fuel gauge needle for correct
indication by moving the fuel unit float up
and down.
Float Position
Needle Position
Upper
“F” (Full)
Lower
“E” (Empty)
No Smoking!
＊
Be careful not to bend or damage the
fuel unit float arm.
＊
AC 110V
Do not damage the fuel unit wire.
＊
Before performing the following test,
operate the turn signals to determine
that the battery circuit is normal.
＊
Fuel Unit Wire
Fuel Unit
G
Y/W
L/W