kymco mo super 950 Instruction De Maintenance

CYLINDER/PISTON INSPECTION
Check the cylinder and piston for wear or

damage.

Clean carbon deposits from the exhaust

port area.

Measure the cylinder bore at three levels of

A, B and C in both X and Y directions.

Avoid the port area.  Take the maximum

figure measured to determine the cylinder

bore.
Service Limit:
SH10DA: 39.05mm replace if over
SF10DA: 39.05mm replace if over

Inspect the top of the cylinder for warpage.
Service Limit:
SH10DA: 0.10mm replace if over
SF10DA: 0.10mm replace if over

Be careful not to damage the cylinder

inside wall.

＊