kymco mo super 950 サービスマニュアル
6
. CYLINDER HEAD/CYLINDER/PISTON
6-7
SUPER 9 50
CYLINDER/PISTON INSPECTION
Check the cylinder and piston for wear or
Check the cylinder and piston for wear or
damage.
Clean carbon deposits from the exhaust
port area.
Measure the cylinder bore at three levels of
A, B and C in both X and Y directions.
Avoid the port area. Take the maximum
figure measured to determine the cylinder
bore.
Service Limit:
SH10DA: 39.05mm replace if over
SF10DA: 39.05mm replace if over
Service Limit:
SH10DA: 39.05mm replace if over
SF10DA: 39.05mm replace if over
Inspect the top of the cylinder for warpage.
Service Limit:
SH10DA: 0.10mm replace if over
SF10DA: 0.10mm replace if over
Service Limit:
SH10DA: 0.10mm replace if over
SF10DA: 0.10mm replace if over
Be careful not to damage the cylinder
inside wall.
*