Yamaha 007POTO-G0 Manuel D’Utilisation

Sending signals from MIX channels to the STEREO/MONO bus

LS9-16/32 Owner’s Manual

If the CSR knob is set to 100%, operating the TO ST
PAN knob will change the signal levels sent to the
STEREO (L/R) bus and MONO (C) bus as shown in
the following illustration.

If a stereo MIX channel is selected, operating the TO
ST BALANCE knob will change the signal levels sent
from the MIX channel to the STEREO (L/R) bus and
MONO (C) bus as shown in the following illustration.

If you want to operate a channel that is not
currently shown in the popup window, use
the [SEL] key to select that channel, and
then make settings for it.

For example if MIX channels 1–8 are shown in the
popup window, pressing the MIX channel 9 [SEL] key
will change the popup window to MIX channels 9–16.

When you’ve finished making settings,
move the cursor to the CLOSE button (or
the

× symbol in the upper right of the win-

dow) and press the [ENTER] key.

PAN knob

Signal sent to the
MONO (C) bus

Signal sent to the
STEREO (L) bus

Signal sent to the
STEREO (R) bus

Signal le

vel

TO ST BALANCE knob

Signal sent from the
odd-numbered MIX
channel to the STE-
REO (L) bus

Signal sent from the
odd-numbered MIX
channel to the
MONO (C) bus

TO ST BALANCE knob

Signal sent from the
even-numbered MIX
channel to the
MONO (C) bus

Signal sent from the
even-numbered MIX
channel to the STE-
REO (R) bus

Signal le

vel

Signal le

vel