Emerson 3000 Manuel D’Utilisation
Installation (Applicable to all Models)
7
Liebert
®
Challenger 3000
™
2.4.1 Handling With Skid
• Always keep the unit upright, indoors and protected from damage.
• If possible, transport the unit using a fork lift; otherwise, use a crane with belts or cables,
• If possible, transport the unit using a fork lift; otherwise, use a crane with belts or cables,
avoiding pressing on the top edges of the packaging.
• If using a fork lift, make sure the forks, if adjustable, are spread to the widest allowable distance
to still fit under the skid.
NOTICE
Risk of overhead interference. Can cause unit and/or structure damage.
Refer to the installation plans prior to moving the unit to verify clearances.
While on the skid, the unit is too tall to fit through a standard height doorway (83 in. or
Refer to the installation plans prior to moving the unit to verify clearances.
While on the skid, the unit is too tall to fit through a standard height doorway (83 in. or
2108mm tall). Any attempt to move the unit, while on the skid, through a standard doorway
will cause damage to the unit.
2.4.2 Removal of Skid
• Remove the plywood skirting that keeps the skid and unit in place.
• Raise the Liebert Challenger 3000 off the skid. Emerson recommends using a fork lift (see
• Raise the Liebert Challenger 3000 off the skid. Emerson recommends using a fork lift (see
Figure 1) or similar machine to ensure that the unit is lifted properly.
• Once the unit is raised, the skid can be removed.
Figure 1
Removing the Liebert Challenger 3000 from skid
Table 1
Unit net weight
Model
Lb. (kg)
036E/035E
535 (243)
060E/059E
545 (247)
042A/040A
615 (279)
067A/065A
670 (304)
046WG/045WG
700 (318)
071WG/070WG
750 (340)
061G/058G
785 (356)
068C/072C
545 (247)
102C/101C
555 (252)
Remove plywood skirting holding
unit and skid in place.
Raise unit with forklift
or similar machine.