Avid Technology digi 1 Manuel D’Utilisation

 

To connect an external device to your system: 

 

1  

 

Connect an unused output (or outputs if stereo) on the Digi 001 I/O Box to an input (or 
inputs if stereo) of the external signal processor.

 

2  

 

Connect the output (or outputs if stereo) of the external signal processor to an unused 

input (or pair of inputs if stereo) on the Digi 001 I/O Box.

 

To set up a send to an external device (digital sends/returns only):

 

1  

 

Choose Setups > Playback Engine and click Other Options.

 

2  

 

Do one of the following:

• If the external device is connected to the S/PDIF RCA jacks, deselect S/PDIF Mirroring. 

(When S/PDIF Mirroring is on, digital output at the S/PDIF RCA jacks exactly mirrors the 
output of analog Channels 1–2.) If you disable S/PDIF Mirroring, you must reset I/O 
labels to reflect this change. See “Resetting Hardware I/O Labels” on page 42.

• If the external device is connected to the Optical ports, choose a format (most likely 

S/PDIF for an effects device) from the Optical Format pop-up menu.

 

3  

 

Choose Internal from the Sync Mode pop-up menu (in most cases).

 

4  

 

Click OK.

You can also label the inputs and outputs you are using in Pro Tools LE to quickly identify 
them as inserts or sends when working in a session.

 

To label hardware I/O Inserts or Sends:

 

1  

 

Choose Setups > I/O Labels. 

 

2  

 

Under Display, click Inputs (for hardware inserts), or Outputs (for hardware sends) and 

name the connections carrying signal to or from the external device (for example, 

 

 and 

 

 or 

 

 and

 

).

 

3  

 

When you have finished, click OK.

 

Resetting Hardware I/O Labels

 

If you make a change to the number or type of inputs and outputs you are using (for 
example, if you turn S/PDIF Mirroring on or off, or you switch the Optical input format 
from ADAT to S/PDIF), you may want to update the I/O labels. This helps you keep track of 
which inputs and outputs are available, and what they are named.

 

To reset hardware I/O labels:

 

1  

 

Choose Setups > I/O Labels.

 

2  

 

Select Inputs, and click Factory Reset.

 

3  

 

Select Outputs, and click Factory Reset.

 

4  

 

Click OK when you are done.