SATO CX200 Manuel D’Utilisation

50

Rev B

 SATO SERVICE MANUAL

1.

Press the FEED switch to assure that the printer is not paused in batch

mode printing.

2.

Confirm that the print media is not exhausted.

3.

Confirm that the print head is securely latched down on both sides.

4.

If you have printed many labels, the printer may have overheated.  Normal

operation will resume after the printer has cooled sufficiently.

1.

Confirm that you have loaded direct thermal media if the unit is a

CX200DT.

2.

Disconnect the cable between the printer and the host computer.  Reset

the printer as described in this manual, then try to print a self-test label

again.

3.

Confirm that the coated (dull) side of the ribbon (CX200TT) is on

the outside where it will be in contact with the label media.

1.

Confirm that the print media is loaded correctly.

2.

Reset the printer as described in this manual.  Confirm that the printer

LED indicator glows green.  Press the FEED button.

3.

If the printer still does not feed, disconnect the communications cable

and repeat step 2.  If the printer feeds with the cable disconnected,

suspect a problem with the host computer or cable.

1.

Press the READY light.

2.

Double-check the AC source and the power supply connections.

3.

Disconnect the cable between the printer and the host, then reset the

printer as described in this manual.

4.

If the READY light glows green with the host disconnected, suspect a host

computer or cabling problem.