Epson equity ie q50188015-1 Manuel D’Utilisation

If you plan to use an operating system other than MS-DOS, you need to

use that operating system to partition the hard disk and copy the system
files to it.

In the following procedures you will be entering MS-DOS commands and
using the working copies of your Startup/Operating 1, Operating 2, and
Reference diskettes. If you are new to computers and MS-DOS, this may be

the first time you have used an operating system. The steps are simple and
you should not have any problems; however, if you do have questions, see

Chapter 4 for basic information about using MS-DOS or see your MS-DOS
manual for complete information on the operating system.

You need to partition the hard disk so it can run the MS-DOS operating
system. Follow the steps below to create one partition on your hard disk for

MS-DOS.

1. Insert your working copy of the Startup/Operating 1 diskette into

drive A.

2. Turn on the computer if it is not on already

3. At the A > prompt, 

type FDISK 

and press 

Enter. 

The screen displays

the FDISK Options menu.

4.

Press 

1 

to select the 

Create DOS Partition 

option and press

Enter. 

The screen displays the following prompt:

Do you wish to use the entire fixed

disk for DOS (Y/N)...........?[Y]