Epson equity ie q50188015-1 ユーザーズマニュアル
Note
If you plan to use an operating system other than MS-DOS, you need to
use that operating system to partition the hard disk and copy the system
files to it.
files to it.
In the following procedures you will be entering MS-DOS commands and
using the working copies of your Startup/Operating 1, Operating 2, and
Reference diskettes. If you are new to computers and MS-DOS, this may be
using the working copies of your Startup/Operating 1, Operating 2, and
Reference diskettes. If you are new to computers and MS-DOS, this may be
the first time you have used an operating system. The steps are simple and
you should not have any problems; however, if you do have questions, see
you should not have any problems; however, if you do have questions, see
Chapter 4 for basic information about using MS-DOS or see your MS-DOS
manual for complete information on the operating system.
manual for complete information on the operating system.
Creating the MS-DOS Partition
You need to partition the hard disk so it can run the MS-DOS operating
system. Follow the steps below to create one partition on your hard disk for
system. Follow the steps below to create one partition on your hard disk for
MS-DOS.
1. Insert your working copy of the Startup/Operating 1 diskette into
drive A.
2. Turn on the computer if it is not on already
3. At the A > prompt,
type FDISK
and press
Enter.
The screen displays
the FDISK Options menu.
4.
Press
1
to select the
Create DOS Partition
option and press
Enter.
The screen displays the following prompt:
Do you wish to use the entire fixed
disk for DOS (Y/N)...........?[Y]
2-2
Preparing a Hard Disk for Use