Aleratec 350103 Manuel D’Utilisation
www.aleratec.com
36
Using the 1:1 HDD Cruiser
Advanced Setup Menu
10-02 Read Error Skip
10-02 Read Error Skip
This function can be enabled to ignore any error that occurs during copying. By
default, the 1:1 HDD Cruiser will halt the copy operation when it encounters
an unreadable area of the source hard disk and display an error. Enabling this
option will ignore any bad sectors on the source hard drive by skipping over
them.
Warning: Setting this function to “On” may result in corrupt data on
copied hard drives.
copied hard drives.
1. Press and hold ESC for about 3 seconds to access the “Adv Setup” menu.
The following screen will be displayed.
2. Use the arrow buttons (or) to scroll to “Read Error Skip”. The
following screen will be displayed.
3. Press ENT to display the current configuration setting. The default setting
is “Off”.
4. Press the arrow buttons (or) to toggle the option “On” or “Off”.
After
changing a setting, remember to press ENT to save it.
ENT
ESC
10. Adv Setup
ENT
ESC
Read Error Skip
Off
Off
ENT
ESC
10-02. Adv Setup
Read Error Skip
Read Error Skip