Aleratec 350103 Manuel D’Utilisation

www.aleratec.com

37

Advanced Setup Menu 
10-03 Update Firmware

This function is used to update the 1:1 HDD Copy Cruiser firmware to a later 

version. 

Note: Firmware updates are available from Aleratec technical support.    

1.a  CD method 

Open the case of the 1:1 HDD Copy Cruiser.  Disconnect the SATA cable  

from the blue connector on the controller board.  Connect a SATA DVD/

CD drive (not included) to the blue connector.  Place the firmware CD in the 

DVD/CD drive.

1.b  Hard Drive method 

Format a hard drive and create a single partition to the smallest capacity 

allowable. Copy the firmware file into the root directory of this partition. 

2.  Power on the 1:1 HDD Copy Cruiser. Once the system has completed its 

startup process, press and hold the ESC button for about 3 seconds to access 

“Adv Setup”. The following screen will be displayed. 

3.  Use the arrow buttons () to select “Update Firmware”, and then press 

ENT. The system will begin scanning for a new firmware version. If found, 

screens similar to the following will be displayed.

4.  Press ENT to begin the firmware update. If the upgrade is successful, the 

system will restart automatically. 





