Epson LX-86TM Manuel D’Utilisation

ASCII code:

Decimal:

27

6 6   ( n 1 )   ( n 2 )   .   .   .   0

Hexadecimal: 1B 44

This command allows setting of up to 

32 horizontal tabs. These

are entered as nl, n2, n3, etc. (in the range 

1 to 137) with the

NUL character as the terminator. The tab settings nl, n2, n3,

etc. must be entered in ascending order. The tab settings can be

cleared by executing the command with nl set to zero. The
settings on power up or after an ESC @ command are every
eight characters.

ASCII code:

Decimal:

Hexadecimal:  1 B

6 5   ( n )   ( s )

This command sets the horizontal or vertical tab increments.
When n is 

0, 

the horizontal tabs are set at intervals of s spaces.

Maximum values are 

21 in pica, 25 in elite and 36 in compressed

text modes. When n is 

1, 

the vertical tabs are set to s line feeds.

ASCII code:

f   ( n )   ( s )

Decimal:

( s )

H e x a d e c i m a l :  1 B

66 

Prints spaces or line feeds without carriage returns. When n is

0, 

s spaces will be inserted up to a maximum of 

127. If n is set

to 

1, s line feeds will be performed.