Epson LX-86TM Manuel D’Utilisation

ESC &

Define User-Defined Characters

Format:

ASCII code:

ESC & NUL (data1) (data2) . . . (data n)

Decimal:

2 7

3 8

0 (data1) (data2) . . . (data n)

Hexadecimal:

1B 26 00 (data1) (data2) . . . (data n)

Explanation:

This command allows characters to be re-defined in the cur-
rently selected mode.

ESC %

Select User-Defined Set

Format:

ASCII code:

ESC % (n)

Decimal:

27 37 (n)

Hexadecimal: 1B 25 (n)

Explanation:

This code selects the user-defined set if n =

1 and the normal set

if n=0. ESC & is required to define the character set.

Dot Graphics

Note: See Chapter 9 for further information on dot graphics.

ESC K

Select Single Density Graphics Mode

Format:

ASCII code:

ESC

K (n1) (n2) (data1) (data2) . . . (data(d))

Decimal:

75 (n1) (n2) (data1) (data2) . . . (data(d))

Hexadecimal:

48 (n1) (n2) (data1) (data2) . . . (data(d))

Explanation:

Turns on Single Density Graphics Mode, printing 480 dots per

8-inch line. If d is the total number of dots required, nl and n2

are calculated thus:

nl=d MOD 256 and n2=INT (d/256).

and are followed by d data bytes.

c-20