Epson powerlite 737c Manuel D’Utilisation

Epson PowerLite 737c Projector

12

 -

 Epson PowerLite 737c Projector

2/05

6. Select the appropriate settings for your mode:

7. When done making settings, highlight the 

OK

 button at the 

top of the screen. Then press 

Enter

. Highlight the 

OK

 

button again and press 

Enter

 to return to the main EasyMP 

Network Screen.

Before connecting to the projector wirelessly, make sure your 
computer is configured correctly. Also, make sure that the 
Internet Connection Firewall is disabled. (See your Windows 
online help system for details.)

1. Access your wireless network Properties window. For 

example, in Windows XP click 

Start > Control Panel > 

Network and Internet Connections

. Then double-click 

the 

Network Connections

 icon. You see a screen similar to 

this:

2. Right-click the 

Wireless Network Connection

 icon and 

select Properties. You see a screen like this:

ESSID

Ad hoc: Enter an ESSID in the ESSID 
textbox.

Access point: Enter an ESSID, which 
is the SSID name of your access point 
or the name of your AirPort network. 
(The name of your AirPort network 
may be different from that of your 
AirPort base station; select your base 
station in the AirPort Admin utility and 
click Configure to check the name of 
your network.) 

Note that the ESSID is case-sensitive.

Password for WEB 
control

If you want to create a password for 
an internal web page, you can enter 
up to 8 alphanumeric characters.

Projector keyword

Turn this option on if you want to set 
up a security keyword so that only 
people in the same room as the 
projector can access it. When you 
connect to the projector wirelessly, it 
displays a four-digit randomized 
keyword on the screen that you need 
to enter when prompted.

DHCP (access point 
mode only)

If your access point assigns IP 
addresses automatically, turn this 
option on. Otherwise, turn it off and 
assign an IP address, subnet mask, 
and gateway address manually.

IP address (access 
point mode only)

Enter the IP address you want to 
assign the projector. It must be 
formatted like other addresses on the 
network; usually the first three 
sections match the access point’s IP 
address. The last section should be 
unique.

Subnet mask. 
(access point mode 
only)

Enter a subnet mask formatted like 
other subnet masks on your network.

Gateway address 
(access point mode 
only)

Enter the IP address that was 
assigned to your access point or 
AirPort base station when it was set 
up. If you don’t know the address, see 
“Checking the Gateway (Access 
Point’s) IP Address” on page 14.

Right-click and select Properties

Click here