Siemens siemens network router mc35 Manuel D’Utilisation
Remote-SAT User's Guide
MC35_SAT_01_v02.00
Page 24 of 65
11.01.2002
1.4.2 AT^SSTGI Remote-SAT Get Information – Refresh (1)
Write command
AT^SSTGI=1
This command is to be used upon receiving an unsolicited result code
^SSTN:1.
The response from the module indicates the type of REFRESH that is going to
be undertaken.
be undertaken.
Response
^SSTGI: <cmdType>, <commandDetails> <CR> <LF>
Parameters
<cmdType>
1 – Proactive command ID, see Table 1
<commandDetails>
Unsigned Integer, range 0 – 255, used as an
enumeration.
0
enumeration.
0
SIM Initialization and Full File Change
Notification;
Notification;
1
File Change Notification;
2
SIM Initialization and File Change Notification;
3
SIM Initialization;
4
SIM Reset; ME is performing a SIM reset.
Therefore a Terminal Response should not be
issued.
Therefore a Terminal Response should not be
issued.
5 to 255 = reserved values.
For every return value of <commandDetails> except 4 (SIM reset) the external
application shall react as follows:
1. Issue the related Terminal Response AT^SSTR=1,<status>.
2. If <status> is 0 (Command performed successfully) the TA is requested to
application shall react as follows:
1. Issue the related Terminal Response AT^SSTR=1,<status>.
2. If <status> is 0 (Command performed successfully) the TA is requested to
show a “Please wait” alert window on its screen until it will receive the RSAT
notification ^SSTN:101 (Terminate proactive command REFRESH).
notification ^SSTN:101 (Terminate proactive command REFRESH).
Reference
Siemens
Note