Alliance Laundry Systems CHM1772C Manuel D’Utilisation

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

22

F8208301

Thoroughness of detail must be stressed with all 

foundation work to ensure a stable unit installation, 

eliminating possibilities of excessive vibration during 

the extract cycle.

The floor and foundation must be minimum 4000 psi 

reinforced concrete set firmly in clean, compacted fill 

dirt. 
The machine must be anchored to a smooth, level 

surface so that the entire base of the machine is 

supported and rests on the mounting surface. (Do not 

support the machine on only four points.) 
Grouting is required.
An elevated foundation must not exceed 8 inches 

(203 mm).
Refer to Table 1 for foundation and anchoring 

requirements.

(20-60 Models)

4 in. 

(102 mm)

2.75 in. 

(70 mm)

Direct-to-floor, elevated 

base frame, or concrete 

foundation

Expansion bolt 

or Epoxy bolt

5/8 in.

(20-60 Models)

6 in. 

(152 mm)

2.75 in. 

(70 mm)

Direct-to-floor, elevated 

base frame or concrete 
foundation

Epoxy bolt

5/8 in.

Speed 

80 Models

9 in. 

(229 mm)

3.25 in. 

(83 mm)

Direct-to-floor or 
concrete foundation 

 Epoxy bolt or 
rebar frame

3/4 in.

125 Models

12 in. 

(304 mm)

3.25 in. 

(83 mm)

* Recommend SAE 495 Grade 5 or higher strength bolts.

Table 1 

W731