Epson 1000 Manuel D’Utilisation

1. If any printed sheets remain in the printer, tear off the

printed pages.

2. Press the LOAD/EJECT button. The printer feeds the

continuous paper backward to the paper-park position.

Caution:

Always tear offpaper before back-feeding; back-feeding too

many sheets can cause a paper jam.

back-feed labels. Labels call easily come their

backing and jam the printer.

3. Move the release lever to the single-sheet position.

Note:

If the

beeps, raise the release lever and press the LOA D/EJECT

button to feed the paper

to the paper-park position. You can

lower the lever again.

4. Attach the paper separators as shown on page l-6.

5. The printer is ready to print. When it receives data, it loads a

single sheet from the paper feeder or manual feed slot.

Switching to continuous paper

To switch from single sheets back to continuous paper, follow

the steps below.

1. If a single sheet is in the paper path, press the LOAD/EJECT

button to eject it.

2. Raise the release lever to the continuous-paper position.

Note:

the

beeps, lower the release

and press the

LOAD/EJECT button to eject the paper. Then raise the

lever

again.

Paper Handling 2-15