Epson 1000 Manuel D’Utilisation

The computer and printer interface settings may not match.

Make sure the settings on the computer and printer match.

The interface may have been disabled. Make sure that the

switch near the interface connector is turned on.

Too many sheets are loaded in the paper feeder. Remove the

paper from the paper feeder and reload the paper no higher

than the mark on the edge guide.

The paper is too thick or too thin to be fed. Make sure the

paper is within the specifications. Some paper types require

manual feeding. See “Technical Specifications” in the

Appendix.

Check that the release lever is in the single-sheet position when

using the push tractor.

The paper-feeder cover may be opened. Close the paper-feeder

cover.

Paper may be jammed near the print head.

The paper is too thin. Make sure the paper is within the

specifications. See “Technical Specifications” in the Appendix.

Using the Printer 3-29