Electrolux w4250n-s Manuel D’Utilisation

115

This error code is generated by the CPU board.
When filling with water, the level specified by the wash program must be 
attained within a certain time. This time is normally set to 10 minutes but 
can vary depending on the type of machine and the software. If the filling 
time eceeds the maximum allowed filling time, error code 01 will be dis-
played.
Long filling times can be caused by a blocked filler valve, defective filler 
valve, a break in the cable between the filler valve control board, defective 
valve control board, leaking level system, etc.

This error code is generated by the CPU board. The error code can only 
arise during an on-going wash program.
This error code will be displayed if the input for closed door signals that 
the door has been opened during an on-going wash program.
This can be caused by a bad or defective door lock, loose cable to door 
lock, problem with door lock edge connection.

This error code is generated by the CPU board. The error code can arise 
at program start. If the door lock doesn't lock within a certain time after 
program start, this error code will be shown.
This error code will also be displayed if the door switch for locked door 
signals that the door has been unlocked during an on-going wash pro-
gram.
This can be caused by a bad or defective door lock, loose cable to door 
lock, problem with door lock edge connection.