Metrologic Instruments TECH 7 Manuel D’Utilisation

With the Metrologic stand (Part #45475), the scanner can be posi-
tioned in one of two directions. The two orientation choices are vertical
or horizontal. (Refer to Figure 1)

To install this stand, use the four 6-32 x ½ inch machine screws and
two #10 pan head wood screws. 

1.  Drill two holes into the work 

surface that are the same size
and distance as the holes on 
the stand base. (Refer to 
Figure 2) 

2.  Use the two #10 pan head 

wood screws to attach the 
stand to the work surface.

3.  To fasten the scanner:

z

For a horizontal mount, 
align the four holes on the
back of the scanner with 
the four clearance holes 
located on the stand 
marked with an X in Figure 3.

z

For a vertical mount, 
align the four holes on 
the back of the scanner 
with the four clearance 
holes located on the stand
marked with a Y in Figure 3.

4.  Fasten the scanner to the stand by inserting the four 6-32 x ½ 

inch screws into the four holes in the scanner's case.

4

3.00 in

1.00 in

1.50 in

X = Holes for Horizontal Mount

Y = Holes for  Vertical Mount