Metrologic Instruments TECH 7 Manuel D’Utilisation

With the Metrologic back plate 
(Part #45473), position the scanner
in one of two directions.  The two
orientation choices are vertical or 
horizontal. (Refer to Figure 4).  To 
use this stand, use the four 
6-32 x ½ inch machine screws and 
four wood screws to attach the unit 
to the back plate and work surface. 
The maximum distance the screws 
should go into the scanner is a ½ inch.

1.  Drill four holes into the work surface that correspond with the 

holes indicated by an XY in Figure 5.

2.  To fasten the scanner to the back plate:

z

For a horizontal mount, align the four holes on the back of 
the scanner with the four clearance holes located on the 
back plate marked with an X in Figure 5.

z

For a vertical mount, align the four holes on the back of 
the scanner with the four clearance holes located on the 
back plate marked with a Y in Figure 5.

3.  Fasten the scanner to the back plate by inserting the four 

6-32 x ½ inch screws into the four holes in the scanner's case.
Fasten the scanner and back plate to the work surface. 

5

Y

X

Y

X

X

Y

Y

X

XY

XY

XY

XY

X = Scanner Horizontal Mount

Y = Scanner Vertical Mount

XY = Back Plate Mounting