Hitachi 42pd7500a Manuel D’Utilisation

  Picture
  Audio
  Timer
  Function
  Setup
     Select
   OK  Set

Setup
  System 

 

System 1

  Colour System
  Video Input
  Scart Output 

Monitor

  RGB1 

 

DVI-STB

  RGB2 

 

Component
HDTV

     Select            Set              Return

OK

Setup
  Colour System

   

AV1 

Auto

   

AV2 

PAL

   

AV3 

PAL 

   

AV4 

Auto

     Select            Return          Exit

Setup
  Video Input

   

AV1 

Composite

   

AV3 

Auto

     Select            Return          Exit

MENU

Setup
  System 

 

System 1

  Colour System
  Video Input
  Scart Output 

Monitor

  RGB1 

 

DVI-STB

  RGB2 

 

Component
HDTV

     Select            Set              Return

OK

System1         System2

Auto         PAL         SECAM

System1

System2

NTSC3.58         NTSC4.43

Auto         NTSC-M

PAL-N         PAL-M

Auto         HDTV         SDTV/DVD

S.Video         Composite

System

Colour System

Video Input

AV1

AV1~AV4

AV3

Do not change the original setting.
(System1 : Europe/Asia, System2 : North America)

DVI-PC         DVI-STB

RGB1

This should correspond to the signal mode of the signal from the
equipment that is connected to RGB1 DVI terminal.

This should correspond to the colour system of the signal from the
equipment that is connected to AV1~AV4 video input terminal.
• Normally, set this to Auto. The system of the input signal will be

automatically recognized.

• If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.

• When the component signal is received, this would be not available

(greyed out).

This should correspond to the signal mode of the signal from the
equipment that is connected to AV3 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

• If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.

DTT          TV         Monitor

Scart Output

DTT : AV1 (Scart) output will be fixed as DTT signal output.
TV:AV1 (Scart) output will be fixed as TV signal output.
Monitor:AV1 (Scart) output can view the image as on the main unit. But it
is possible to monitor only the composite video signal from AV2, AV3, or
AV4 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.

This should correspond to the signal mode of the signal from the
equipment that is connected to AV1 Scart input.

RGB         Component

RGB2 (1st step)

This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.

Auto         HDTV         SDTV/DVD

RGB2 (2nd step)

This step should be set only when [Component] is selected on the 1st
step.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
• Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

• If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.