Hitachi 42pd7500a ユーザーズマニュアル
41
SETUP MENU (Video mode)
Picture
Audio
Timer
Function
Setup
Select
OK Set
Audio
Timer
Function
Setup
Select
OK Set
Setup
System
System
System 1
Colour System
Video Input
Scart Output
Video Input
Scart Output
Monitor
RGB1
DVI-STB
RGB2
Component
HDTV
HDTV
Select Set Return
OK
Setup
Colour System
Colour System
AV1
Auto
AV2
PAL
AV3
PAL
AV4
Auto
Select Return Exit
Setup
Video Input
Video Input
AV1
Composite
AV3
Auto
Select Return Exit
MENU
Setup
System
System
System 1
Colour System
Video Input
Scart Output
Video Input
Scart Output
Monitor
RGB1
DVI-STB
RGB2
Component
HDTV
HDTV
Select Set Return
OK
Selected characters
Setup hint
System1 System2
Auto PAL SECAM
System1
System2
NTSC3.58 NTSC4.43
Auto NTSC-M
PAL-N PAL-M
Auto HDTV SDTV/DVD
S.Video Composite
System
Colour System
Video Input
AV1
AV1~AV4
AV3
Do not change the original setting.
(System1 : Europe/Asia, System2 : North America)
(System1 : Europe/Asia, System2 : North America)
DVI-PC DVI-STB
RGB1
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB1 DVI terminal.
equipment that is connected to RGB1 DVI terminal.
This should correspond to the colour system of the signal from the
equipment that is connected to AV1~AV4 video input terminal.
• Normally, set this to Auto. The system of the input signal will be
equipment that is connected to AV1~AV4 video input terminal.
• Normally, set this to Auto. The system of the input signal will be
automatically recognized.
• If the input signal contains much noise or has a low level at Auto and
the operation is found erratic, set this to match the input signal.
• When the component signal is received, this would be not available
(greyed out).
This should correspond to the signal mode of the signal from the
equipment that is connected to AV3 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
equipment that is connected to AV3 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
automatically recognized.
• If the input signal contains much noise or has a low level at Auto and
the operation is found erratic, set this to match the input signal.
DTT TV Monitor
Scart Output
DTT : AV1 (Scart) output will be fixed as DTT signal output.
TV:AV1 (Scart) output will be fixed as TV signal output.
Monitor:AV1 (Scart) output can view the image as on the main unit. But it
is possible to monitor only the composite video signal from AV2, AV3, or
AV4 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.
TV:AV1 (Scart) output will be fixed as TV signal output.
Monitor:AV1 (Scart) output can view the image as on the main unit. But it
is possible to monitor only the composite video signal from AV2, AV3, or
AV4 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.
This should correspond to the signal mode of the signal from the
equipment that is connected to AV1 Scart input.
equipment that is connected to AV1 Scart input.
RGB Component
RGB2 (1st step)
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
equipment that is connected to RGB2 D-sub terminal.
Auto HDTV SDTV/DVD
RGB2 (2nd step)
This step should be set only when [Component] is selected on the 1st
step.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
step.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
automatically recognized.
• If the input signal contains much noise or has a low level at Auto and
the operation is found erratic, set this to match the input signal.
TV SETUP OPERATION (continued)