ONKYO TX-NR1010 Manuel D’Utilisation

The following table indicates the channels you should use 
depending on the number of speakers that you have. 
No matter how many speakers you use, 2 powered 
subwoofers are recommended for a really powerful and 
solid bass.
To get the best from your surround sound system, you need 
to set the speaker settings automatically (

).

*1

If you’re using only one surround back speaker, connect it to 
the SURR BACK L terminals. 

Front speakers

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Center speaker

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Surround 
speakers

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Surround back 
speaker

✔

✔ ✔

✔

Surround back 
speakers

✔

✔ ✔

✔

Front high 
speakers

✔

✔

✔

✔ ✔ ✔

Front wide 
speakers

✔

✔

✔ ✔ ✔ ✔

■

The following illustration shows how to connect the speakers to each pair of terminals. If you’re using only one surround 
back speaker, connect it to the SURR BACK L terminals. Select the speakers (surround back, front high, front wide) you 
want to use for 7.2-channel playback. You can set which speakers you want to use by priority. See “Selecting Speaker 
Layout” (

).

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends 
of the speaker cables, and twist the bare wires tightly, as 
shown.

■

• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center 

hole of the speaker terminal.

Surround 

back left

Surround 

left

Surround 

right

Front high 

left

Front high 

right

Front left

Front right

Center

Front wide 

right 

Front wide 

left

Surround 

back right

1/2" to 5/8" (12 to 15 mm)