HTC touch pro 2 Manuel D’Utilisation

18  Getting Started

You need to remove the back cover before you can install the battery and storage card. Also, make sure to 

always turn off the power before installing or replacing the battery.

Make sure your device is turned off.
Remove the stylus.

Note  You need to temporarily remove the stylus to be able to remove or 

replace the back cover.

Firmly hold the device with both hands and the front panel facing 

down.
Push the back cover up with your thumbs until it disengages from 

the device and then slide it up to remove.

Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-

specified original batteries and accessories. Battery performance depends on many factors, including network 

configuration, signal strength, and usage patterns. For battery life estimates, see “Specifications” in the 

Appendix.

Warning!  To reduce risk of fire or burns:
 

 Do not attempt to open, disassemble, or service the battery pack.

 Do not crush, puncture, short external contacts, or dispose of in fire or water.

Do not expose to temperatures above 60°C (140°F).

Replace only with the battery pack designated for this product.

 Recycle or dispose of used battery as stipulated by local regulations.

Align the battery’s exposed copper contacts with the 

battery connectors at the bottom part of the battery 

compartment.
Insert the contacts side of the battery first and then 

gently push the battery into place.
Replace the back cover and insert the stylus back 

into the stylus compartment.

RESET

Groove

Lift out the battery from the groove at the upper right side of the battery compartment.