HTC touch pro 2 Manuel D’Utilisation

Getting Started  19

To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and 

install it into your device.

Remove the stylus and then remove the back cover.
Locate the microSD card slot on the upper part of the 

exposed right panel.
Insert the microSD card into the slot with its gold 

contacts facing down until it clicks into place.

Note  To remove the microSD card, press it to eject it from the slot.

RESET

Storage 

card slot

New batteries are shipped partially charged. Before you start using your device, it is recommended that you 

install and charge the battery. Some batteries perform best after several full charge/discharge cycles.

Note  Only the AC adapter and USB sync cable provided with your device must be used to charge the device. Use of 

unauthorized AC adapters and USB sync cables can impact the performance of your device. 

Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC 

adapter to an electrical outlet to start charging the battery.
Charging is indicated by a solid amber light on the Notification LED. As the battery is being charged while the 

device is on, a charging icon   also appears in the title bar of the Home screen. After the battery has been fully 

charged, a full battery icon 

 appears in the title bar of the Home screen.

 Do not remove the battery from the device while you are charging it using the AC or car adapter.

 As a safety precaution, the battery stops charging before it overheats.

After installing and charging the battery, you can now power on and start using your device.

Press the END/POWER button.

Press and hold the END/POWER button for a few seconds.
Tap Yes when prompted.

Press the SLEEP/LOCK button to put the device in Sleep mode and turn off the display, and also to lock the 

device. Sleep mode suspends your device to a low power state while the display is off in order to save battery 

power.
Your device automatically goes into Sleep mode when you leave the device idle after a certain period of 

time. You are still able to receive messages and calls while your device is in Sleep mode. Your device wakes 

up automatically when you receive an incoming call. To wake up your device manually, press the SLEEP/LOCK 

button to turn the display on and then tap the UNLOCK button on the screen..