Q-Logic 8200 Manuel D’Utilisation

Quick Start
Step 2. Install the Adapter Hardware

xx

SN0054671-00  A

To install the adapter hardware, you need to open the computer and locate the 
appropriate bus slot. If necessary, consult your computer system manual for 
instructions on how to remove the computer cover. 

Follow these steps to install the adapter hardware: 

1.

Power off the computer and all attached devices such as monitors, printers, 
and external components. 

2.

Disconnect the power cable.

3.

Remove the computer cover and find an empty PCIe

®

 x8 (or larger) bus slot. 

4.

Pull out the slot cover (if any) by removing the screw or releasing the lever. 

5.

Install the low-profile bracket (if required).

6.

Grasp the adapter by the top edge and seat it firmly into the appropriate slot 
(see 

).

7.

Refasten the adapter’s retaining bracket using the existing screw or lever. 

8.

Close the computer cover.

ADAPTER 
RETAINING 
BRACKET

LEVER

SLOT COVERS

SYSTEM 
CHASSIS

PCI EXPRESS 
x8 (OR 
LARGER) SLOT 
REQUIRED 
FOR QLOGIC 
ADAPTERS.

SCREW

ADAPTER