Q-Logic 8200 Manuel D’Utilisation

2–Configuring NIC
NIC TroubleShooting/Diagnostics

2-74

SN0054671-00  B

Linux user diagnostics include QConvergeConsole diagnostics and ethtool 
diagnostics.

QConvergeConsole CLI-based diagnostics include the following commands: 



To enable or disable the port beacon, issue the following command: 



To run an internal loopback test, issue the following command: 

qaucli -pr nic -intloopback <cna_port_inst> <tests_num> 
<on_error>

where 

tests_num

 is the number of tests (1–65535) and 

on_error

 is either 

0=Ignore

 or 

1=Abort



To perform a Flash test, issue the following command: 



To perform a hardware test, issue the following command: 



To perform an interrupt test, issue the following command: 



To perform a link test, issue the following command: 



To perform a register test, issue the following command:

Information on installing and starting the GUI version of QLogic's 
QConvergeConsole utility is provided in the QConvergeConsole User's 
Guide. All procedural information for that utility is covered in the 
QConvergeConsole Help System.