Q-Logic 8200 Manuel D’Utilisation

2–Configuring NIC

NIC Partitioning (NPAR)

SN0054671-00  B

2-51

5.

Save your changes (

6.

Reboot the host server after completing NPAR configuration.

The QConvergeConsole is a web-based client/server application that allows for 
centralized management and configuration of QLogic adapters within the entire 
network (LAN and SAN). On the server side, QConvergeConsole runs as an 
Apache Tomcat Server web application. After the application is launched on the 
web server, you can connect to QConvergeConsole's GUI through a browser, 
either locally on the server or remotely from another computer. Your browser 
window becomes the client used to connect to servers that host the 8200 and 
3200 Series Adapters and connected storage devices within the network.

You can use QCC GUI to configure and manage 8200 and 3200 Series Adapters 
installed on either Linux or Windows host servers. 

Do not set any bandwidth percentages for the FCoE function. The 
adapter uses the enhanced transmission selection (ETS) settings for 
determining FCoE bandwidth. The NIC bandwidth settings configured 
in the 

 are not a percentage of the line rate (10Gb): they 

are a percentage of the NIC bandwidth allocated to this NIC port 
through ETS on the switch.