Ford 2006 five hundred Manuel D’Utilisation
Do not sit on top of a buckled safety belt to avoid the
BeltMinder
BeltMinder
娂 chime. Sitting on the safety belt will increase the
risk of injury in an accident. To disable (one-time) or deactivate the
BeltMinder
BeltMinder
娂 feature please follow the directions stated below.
One time disable
If at any time the driver/front passenger quickly buckles then unbuckles
the safety belt for that seating position, the BeltMinder
the safety belt for that seating position, the BeltMinder
娂 is disabled for
the current ignition cycle. The BeltMinder
娂 feature will enable during
the same ignition cycle if the occupant buckles and remains buckled for
approximately 30 seconds. Confirmation is not given for the one time
disable.
approximately 30 seconds. Confirmation is not given for the one time
disable.
Deactivating/activating the BeltMinder
姟 feature
The driver and front passenger BeltMinder
娂 are
deactivated/activated independently. When deactivating/activating
one seating position, do not buckle the other position as this will
terminate the process.
one seating position, do not buckle the other position as this will
terminate the process.
Read Steps 1 - 4 thoroughly before proceeding with the
deactivation/activation programming procedure.
deactivation/activation programming procedure.
Note: The driver and front passenger BeltMinder
娂 features must be
disabled/enabled separately. Both cannot be disable/enabled during the
same key cycle.
same key cycle.
The driver and front passenger BeltMinder
娂 features can be
deactivated/activated by performing the following procedure:
Before following the procedure, make sure that:
• The parking brake is set
• The gearshift is in P (Park) (automatic transmission)
• The ignition switch is in the OFF position
• The driver and front passenger safety belts are unbuckled
• The parking brake is set
• The gearshift is in P (Park) (automatic transmission)
• The ignition switch is in the OFF position
• The driver and front passenger safety belts are unbuckled
To reduce the risk of injury, do not deactivate/activate the
BeltMinder
BeltMinder
娂 feature while driving the vehicle.
1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)
START THE ENGINE)
2. Wait until the safety belt warning light turns off. (Approximately 1
minute)
minute)
2006 Five Hundred (500)
Owners Guide (post-2002-fmt)
USA (fus)
Owners Guide (post-2002-fmt)
USA (fus)
Seating and Safety Restraints
118