Konica Minolta kn-304 Manuel D’Utilisation

KN-304 Network Board  2-5

Chapter 2  Setting up from the LCD Panel

●

 Set IP mode

Select [1. Set IP mode] from the TCP/IP Setup menu: the [DHCP Menu] window appears.

Select [1. Enable DHCP] to use DHCP and [2. Disable DHCP] otherwise.  Press [Previous] to go back to the

previous menu.

●

 IP Settings

If you have selected [2.Disable DHCP] in the DHCP Menu, it is needed to define an IP address, subnet

mask and gateway and to enable the IP address defined.

As you select [2. IP Settings] in the TCP/IP Setup menu, the screen will appear as follows.  You have to

define all of the four items.  Press the number key associated with the corresponding menu item and enter

a value.  Press [Previous] to go back to the previous menu.